Tips For Windshield Wipers

Maintenance Tips for car Windshield Wipers.
Many people think when it rains there is luck or fortune that come down with rain. If you're in the car, in order to good luck be with you, you have to maintain your windshield wipers. Because these components are closely concerned with the safety of driving a car when it rains. The trick is, you have to take care of your car windshield wipers. Starting from the rubber wiper, wiper rod, Wiper tube, Wiper Motor, and the last nozzle as the water out.

1.Wiper rubber. As the most important part of the windshield wipers, in charge of sweeping the water on the windshield, rubber must be kept clean. If your wiper rubber was broken, no need to replace the entire wiper. You can replace the rubber only, of course, this can cut your spending.

2. Wiper shaft. On the wipers, rods play an important role, because without this rod, it's unlikely that you can operate the windshield wipers. Of particular interest is twofold. On the handle itself wiper, wiper handles have shaped the letter "u" or a type of bolt system. Take care not to rust, as if it would rust prone to fracture. And a second spring, spring wiper weak, making the pressure on the glass is also reduced. Especially when the wipers start working.

3. The Motor and Tube. This component also need to consider, wiper motor may have been damaged, it is certainly a way of checking you all already know is not it? Simply by pressing a button to activate the wipers, and listen to what you hear from the wiper motor. If it does not sound mean problem with wiper motor. 

4. Wiper water. Do not let the water is dirty, as if the dirt can damage the wiper motors and clog the wiper nozzles, use clean water, or you can use the wiper water sold in the market.

Hopefully this article on Maintenance Tips for Car Windshield Wiper, can be useful and helpful for you. Thanks wassalamualaikum.

Types Of Car Wiper

Wipers. This component is required if the weather is rainy. Serves to sweep the patter of rain on car windshield, so it does not disturb driving visibility. Many different types on the market with different brands. There are kinds of Full Frame (blade), Refill and Framless.

The factory product is usually a fullframe-type, which has an iron handle. This Wiper type is recognized more robust, so as to wipe the windshield is more optimal. the Next type is Refill Wiper Type, which is only sold rubber only. In assembly, this type of product simply adjust its frame. So you just cut, adjust the size of the old frame as the holder, rather difficult and must be careful to set it.

Latter type is a Framless Wiper,  no longer taking the iron frame, but clipped frame, which is made of flexible plastic.  This Wiper Types, has also been applied by many car manufacturers, not only Europe made ​​but also Japanese car manufacturers have also used it.

That need attention for Full frame Wiper is when the rubber has run out, will risk making the windshield scratched. different if using Framless Wiper, the material more soft, as the handle is made of plastic or synthetic rubber. So do not risk making the scratched the front glass of car, if the rubber has been run out.

From these three type of wipers, of course the choice depends on your needs and tastes, and you also have to consider the price. Another thing that is important for note, also the length of wiper, which is usually measured in inches long. Customize your car specifications.

Hopefully this article on The Types Of Car Wiper can be useful and helpful for you. Thank you, wassalamualaikum

Things Shortening Age Use of car battery

 Bismilah. First you should know that the car battery is the average age of 1.5 years, so if your battery life is less than 1.5 years there is a problem, this problem is usually in addition to external factors, the error is also derived from the treatment, would be very unfortunate if the battery life is an average of 1.5 years, turned out to be shorter than it should, given the current battery prices are very expensive.
There are several causes which make the life of the battery becomes shorter, include:
 
1. Expiry, it is not just food that expires, but also car batteries. You see a row of numbers on your car battery, for example, writing "3018C4K", number "30" on the front line is the date of manufacture, then the number "1" indicates the month of January, when the battery is made. Behind her were the number "8" which indicates the manufacture of car batteries in 2008. The letter "C" indicates shift factory worker. The number "4" behind the "C" indicates the machine. And the last letter "K" indicates the factory location. Well this year of manufacture code you can make the benchmark to buy your car battery.

2. Car battery terminals are loose, both positive and negative battery terminal should not be loose, if the car battery terminals loose, then the charging current and the supply to be imperfect. If the positive terminal is loose, then charging to be imperfect, while the current issued remain, consequently battery could come up short, and when the leave would damage the battery. so also when the negative terminal of the slack, but the equipment is to be not optimal, the battery may experience overcharging.


3. Temperature factor, do you know if the air temperature can reduce the battery service life, the hotter the temperature, the battery life of a short semakain. For one thing it's rather difficult for us avoid this, because this is a natural effect, to reduce the effects of this heat, then given a battery insulator surrounding the battery, aim to prevent engine heat mengintrusi car battery, but there are some brands of car which put the battery in the trunk, of course, this can reduce the temperature of the heat from the engine.

Hopefully this article on Things That Shorten Age Use a car battery, it can be useful and helpful for you. Thank wassalamualaikum

Tips To Drive Automatic Transmission Car, how to drive automatic transmission car.?

Bismillah. There were many conveniences on offer in the car with automatic transmission, no clutch pedal in this car makes the driver a little more relaxed in driving the car, because it does not need the clutch to shift gears, all done automatically by the transmission. Basically the use of an automatic transmission with manual transmission is almost the same. But for some people who do not understand will certainly find it difficult. Well let's review the tips for driving safely and correctly with the automatic transmission car.

First. Before you turn on the car make sure the transmission lever is in position "P" or "N", it serves to safety, to avoid the vehicle suddenly drove the car during the turn, but most of the cars today have the ignition key technologies that are not can pull the lever when the position of the transmission has not been on the Position of "P". but this step is still needed for prevention. Second. Consider the indicator lights on the car dashboard, while the position of the ignition key in position "ON", a car computer system (ECU) will perform on the devices in cars, such as ABS, Radiator, oil volume, the volume of fuel, airbag, etc. other. Wait until the indicator light goes out, if there is not one lamp goes out, there is a problem on these devices. Ok after all the lights went out then you can turn on the car.

Third. Once the machine is alive and wait for the engine temperature reached normal working temperature of about 3 minutes, so the oil circulates perfectly on the machine, before you select the gear position of the position "R" or "D", push brake pedal first, this is done for safety . After you select the gear position, brake pedal and deactivated parking brake switch. And you can run your car with the gas pedal slowly. Fourth. Over Drive (OD), the function of this button to detain or restrict the movement of the gear, if the transmission cars have a "4" to enable the acceleration,  the gear  will be limited to "3", this feature serves to get the engine power and increase the speed of the car when preceding vehicle in front or on the hill.

Fifth, when you stop for a long time as the red lights, move the position of the gear in position "N", this is to save your vehicle clutch linings. Sixth. "L" (low) or "1", this position is use when you are requiring greater engine power, such as ramp, same with the gear position "1" on a manual transmission car.

 

hopefully   tips to Drive Automatic Transmission can be useful for you, Thank you wassalamualaikum.

Tips on buying a used car

Bismilah. Buying a used car is a wise choice at this time, you can save on expenses,  and you can still get a good conditioned car , but for those of you that are the first time buying  used cars, there are some points you should consider so that you will not regret it later.

First note the condition of the engine, you can see from car exhaust fumes, see whether black or white, if the car is black smoke means the engine wasteful of fuel, in this case the car needs service light. If there is a whitish oil indicates that burned in the engine, in this particular case there is a damage to the components of the piston, ring, or seal the valve. So you have to choose a car with a clean exhaust fumes are colorless.


Brakes, do the road test and feel the car brakes, whether or not grip, also note the indicator on the dashboard, for the cars  that have Antilock Brakes  System (ABS) if there is having brake problem the indicator lights will light up, and note also the thickness of  brake linings and disc brake, if at the time the brake is pressed sounds, it may be a sign of brake lining is running out or a lot of dirt on the brake. Also note the car power steering, if it is damaged car handling  will be uncomfortable and unstable, notice is there a leak in power steering components, there are several brands of cars that have a specific problem with power steering.


Here you are required accuracy, consider the interior.  Open up the carpet to determine the condition of the floor, if a lot of rust is most likely the car has experienced flood, and watch accessories or completeness of the components inside the cabin. And for the Exterior. Look around the vehicle body, make sure no trace of collision. And also rust, rust is usually found on the sidelines of a less dense rubber body wrap, usually found in the surrounding glass. look paint carefully, usually in the car that has repainted, the paint difference betwen the old and the new paint will appear.

Hopefully this article on Tips on buying a used car, it can be useful and helpful for you. Thank you.