Tips To Drive Automatic Transmission Car, how to drive automatic transmission car.?

Bismillah. There were many conveniences on offer in the car with automatic transmission, no clutch pedal in this car makes the driver a little more relaxed in driving the car, because it does not need the clutch to shift gears, all done automatically by the transmission. Basically the use of an automatic transmission with manual transmission is almost the same. But for some people who do not understand will certainly find it difficult. Well let's review the tips for driving safely and correctly with the automatic transmission car.

First. Before you turn on the car make sure the transmission lever is in position "P" or "N", it serves to safety, to avoid the vehicle suddenly drove the car during the turn, but most of the cars today have the ignition key technologies that are not can pull the lever when the position of the transmission has not been on the Position of "P". but this step is still needed for prevention. Second. Consider the indicator lights on the car dashboard, while the position of the ignition key in position "ON", a car computer system (ECU) will perform on the devices in cars, such as ABS, Radiator, oil volume, the volume of fuel, airbag, etc. other. Wait until the indicator light goes out, if there is not one lamp goes out, there is a problem on these devices. Ok after all the lights went out then you can turn on the car.

Third. Once the machine is alive and wait for the engine temperature reached normal working temperature of about 3 minutes, so the oil circulates perfectly on the machine, before you select the gear position of the position "R" or "D", push brake pedal first, this is done for safety . After you select the gear position, brake pedal and deactivated parking brake switch. And you can run your car with the gas pedal slowly. Fourth. Over Drive (OD), the function of this button to detain or restrict the movement of the gear, if the transmission cars have a "4" to enable the acceleration,  the gear  will be limited to "3", this feature serves to get the engine power and increase the speed of the car when preceding vehicle in front or on the hill.

Fifth, when you stop for a long time as the red lights, move the position of the gear in position "N", this is to save your vehicle clutch linings. Sixth. "L" (low) or "1", this position is use when you are requiring greater engine power, such as ramp, same with the gear position "1" on a manual transmission car.

 

hopefully   tips to Drive Automatic Transmission can be useful for you, Thank you wassalamualaikum.