How
to choose Radiator Coolant
Perhaps many people are filling
their vehicles radiator with ordinary mineral water, this may be understandable
in the past. At which time, the car engine technology is not as sophisticated
today. the high heat engine
in modern engines do not escape from the demands of the engine to catch the
maximum performance. and of course the selection of appropriate water radiator
shall be required for your vehicle, a car with sophisticated technology to use
liquid cooling radiator. This liquid has a function other than as a coolant as
well as anti-rust. There are actually two types of radiator coolant.
first. Pre-mixed, this type of show you do not need to add any additional ingredients, you just need to pour it. This type is usually packaged in containers 3-5 liter, according to the capacity of a car radiator water. and usually the price of this type is more expensive than other types of Self-mixing.
second, Self-mixing, this type of cost less, and you should add this liquid with a solvent, usually there are instructions for use are listed on the packaging, usually used as the solvent is water, but water used should be free of minerals, free silica, fluoride, and chlorine, due to the above four substances can cause problems for the radiator system, because it can settle and cause rust.
So it's up to you, you can use any type of pre-mix or Self-mixing.
Hopefully this article on 'how to choose the radiator coolant' can be useful to you. thank you
first. Pre-mixed, this type of show you do not need to add any additional ingredients, you just need to pour it. This type is usually packaged in containers 3-5 liter, according to the capacity of a car radiator water. and usually the price of this type is more expensive than other types of Self-mixing.
second, Self-mixing, this type of cost less, and you should add this liquid with a solvent, usually there are instructions for use are listed on the packaging, usually used as the solvent is water, but water used should be free of minerals, free silica, fluoride, and chlorine, due to the above four substances can cause problems for the radiator system, because it can settle and cause rust.
So it's up to you, you can use any type of pre-mix or Self-mixing.
Hopefully this article on 'how to choose the radiator coolant' can be useful to you. thank you
0 comments:
Post a Comment